--- Skip to content
Design2026-10-245 min read

Floor plan and single-line diagram: keeping them in sync

The most expensive drawing error is a plan and a single-line that contradict each other: the installer trusts one, the inspector reads the other. The fix is a single engineering model — edit in one place and regenerate the whole set.

Author:GorkyCAD Team

Where mismatches come from

Mismatches are born from a simple habit: the plan and the scheme live as two independent drawings, often in two files, sometimes by two people. The plan moves a socket group to another wall, the scheme never hears about it. The scheme swaps a breaker rating after a calculation, the plan keeps the old cable. Each edit is locally reasonable; together they produce a set where the installer must guess which document tells the truth.

The usual suspects are familiar to anyone who has issued documentation: group counts per panel that differ between plan and scheme, breaker ratings corrected in one place only, cable cross-sections from an older calculation round, and phases assigned on the plan but never carried into the scheme. The root cause is never laziness; it is the absence of a single source of truth, so every change must be carried by hand into every drawing.

One model instead of two drawings

The single-model workflow inverts the hierarchy: the engineering model is the source of truth, and the plan and the single-line are its views. A group exists once — with its load, cable, protection and phase — and both documents render that same object. Move the group on the plan and the scheme updates; change the breaker in the panel and the plan annotation follows. There is simply no second copy to forget.

GorkyCAD Pro is built exactly this way: a browser CAD where the single engineering model produces the plan, the single-line, the panel, 3D views, the specification, the estimate and the PDF set. The deterministic local calculation engine keeps figures repeatable, while the AI assistant helps with routine placement and rule checks but never touches the calculations. Start free in the editor at https://gorkycad.com/cad/; the model stays consistent from the very first group.

Edit order: what changes first

When a change arrives, touch the model first and the documents second. A new load means creating the group with its power and duty in the model, not drawing a symbol on the plan. A recalculated cable means updating the group properties, not retyping text in the scheme. A moved socket means dragging the point on the plan, which is itself model data. Documents are then regenerated — they cannot lag because they are produced from the current state.

  • New or changed load — update the group in the model first.
  • Recalculated protection or cable — change properties, not drawing text.
  • Moved points — move them on the plan, the model follows.
  • Renamed panels and feeders — rename once, every view inherits.
  • Only then — regenerate the scheme, the schedule and the PDF set.

The discipline pays off under pressure: when five changes land the night before issue, the ordered engineer edits five model objects instead of hunting the same change across five drawings. Fewer keystrokes, fewer forgotten copies.

Auto-generating the scheme from the model

In GorkyCAD the single-line is generated from the model automatically rather than drawn by hand: feeders, breakers, RCDs, meters and phase buses are rendered from the same groups and panel data that the plan shows. Symbols follow established standards — IEC 60617 on the international side — so the generated scheme reads like a proper engineering document, not a sketch.

Automatic does not mean unsupervised: always review the generated scheme as an engineer before issue. Check the incomer chain — switch, breaker, meter — the phase buses, the group rows with their designations, and the notes the generator adds. The 25 IEC 60364 checks (41 PUE/GOST/SP checks in the Russian version — different bases, never mix them) run over the model and flag protection and sizing mistakes before they reach paper. Generation plus review beats manual drafting on both speed and consistency — but review is the part you must never skip.

Typical synchronisation mistakes

The most frequent mistake is the scheme-only fix: a rating corrected in the scheme text while the model keeps the old value, so the next regeneration silently wipes the fix — or worse, the fix ships while quantities and the plan disagree. Second is renaming without renaming: a panel called one thing on the plan and another in the scheme, which confuses installers and inspectors equally. Third is the stale cable schedule: cable lengths from an older plan revision survive into the issued set because nobody regenerated after rerouting.

Two process traps complete the list: issuing the PDF from cached files instead of a fresh regeneration, and letting two people edit two copies in parallel with a manual merge at the end. Both are solved by ritual — regenerate everything before every issue, keep one model file per project state. Remember the standing disclaimer: software figures and exports before sign-off are preliminary materials; the responsible engineer approves the issued set.

GorkyCAD: plan, panel and single-line from one model

The practical payoff of one model is the issued set: plan, single-line, panel schedule, cable schedule, specification and estimate generated together from the same data. The cable schedule follows the same standard logic as the drawings, quantities in the estimate match the specification, and the panel passport with QR travels with the same figures.

The workflow also survives bad connectivity: the PWA keeps working offline with local data and calculations, showing a banner that synchronisation comes later, so plan edits on site are not lost. Imports fit the same picture — a BTI inventory plan photo or scan becomes the project base with AI wall recognition, DXF and IFC come in natively, and only DWG needs a free converter hint. When the model is ready, move to Pro (€40/mo, see https://gorkycad.com/en/pricing/) for the full set: documentation, exports and the complete AI assistant.

Final check before PDF

Before issuing, run the reconciliation pass: group count per panel identical on plan and scheme, breaker ratings and designations matching, cable cross-sections from the latest calculation round, phases assigned consistently. Then regenerate — the scheme, the panel schedule, the cable schedule — and export the PDF set from the fresh files, never from yesterday's cache. A ten-minute pass catches the errors that cost days on site.

Finish with the human signatures of quality: the engineer reviews the generated scheme, the price date sits on the estimate, and the set carries a revision note so the next change starts from a known state. The goal is not bureaucracy but confidence — everyone who opens the set, from installer to inspector, reads the same truth. One model, one regeneration, one consistent package: that is the whole method.

FAQ

Which comes first, plan or scheme?

Neither should be crowned king: the plan captures the intent — where loads sit and how cable runs go — while the scheme captures the logic — protection, selectivity and phase assignment. In a single-model workflow the question dissolves, because both documents are views of the same model.

How to spot mismatches?

Compare the two documents line by line: every group on the plan must exist in the scheme with the same breaker, cable and phase, and every scheme feeder must have a home on the plan. The fastest traps are the group count per panel, breaker ratings and cable cross-sections. In a single model this reconciliation is largely automatic, but a final human pass over the generated scheme stays mandatory.

Edit the scheme alone?

Only as a sketch, never as the final state. A scheme edited alone immediately starts lying: the plan still shows the old breakers, quantities and phases, and the next person to work from the plan inherits the lie. The safe order is to change the model — the group, its load, its protection — and regenerate the scheme from it.

When to regenerate?

Regenerate whenever the model changes in a way that affects protection, phases, cable or quantities: moved groups, new loads, replaced breakers, rerouted lines. Cosmetic plan tweaks that touch no electrical property need no regeneration. A good habit is a fresh regeneration before every PDF issue, so the issued set always reflects the current model rather than last week's scheme.

Single-model workflow in GorkyCAD

Keep the plan and the single-line in one model: edit once, regenerate the whole set and export the PDF package.

Open GorkyCAD